All Guitar Chords · Forum archive

electronics help

steveo182 · 2010-09-01 12:17

my bridge pick up cuts out almost completely when its switched on to it. I looked in the back of the guitar and all the wiring seems to be soldered down pretty solid. Is it something wrong with the pick up? Should I take it out and see whats up? I really do not want to pay to have it fixed if its something minor. Thanks

macandkanga · 2010-09-01 12:28

Maybe something wrong with the switch. Are they active or passive? Is there a battery? What kind of guitar?

tinyskateboard · 2010-09-01 13:30

+1 I got a used Les Paul recently that had that problen so I got a new switch and it solved the problem. Pickups are delicate so if you examine them be very careful not to pull on tape.

Domigan_Lefty · 2010-09-01 19:56

@tinyskateboard Really? Ive beaten the **** out of my pickups, taken them apart, dropped them, and nothing is wrong with any. @steveo182 Your pickups appear to be active. Is the battery dead/dying?

tinyskateboard · 2010-09-02 11:52

Depending on how far you get into them during an "examination". If you rip the thin wires that make the pickup a pickup, things will not be good. My EMG's are pretty bulletproof but here is nothing to examine if something went wrong except 'are the wires attached?".

steveo182 · 2010-09-02 19:29

Its a schecter c1 plus...passive pickups, I bet it is the switch... my neck pick up used to cut out if i didnt lightly switch over. Or some times I had to switch them on and off 2 or 3 times for it to work... then i took the back plate off to see and thats when the bridge pickup stopped working.