All Guitar Chords · Forum archive

electronics

J.M.P.A. · 2008-05-17 21:37

Hi I want to know if someone here know about electronics in tube amps. Because I have the Epiphone Valve Junior and I want to make some upgrades to it. Thanks

joe · 2008-05-18 16:26

what sort of upgrades? like changing the tubes or what?

J.M.P.A. · 2008-05-19 07:10

changing the type of tubes used to get more output power like an old epiphone galaxy 10 that has the same circuit inside but with a different output tube that puts 10watts out.

Phip · 2008-05-19 07:24

@J.M.P.A. go to google and type "modify Epiphone Valve Junior". lots of information including a book. phip

J.M.P.A. · 2008-05-19 08:12

Thanks I have viewed this but the problem is that there is a modification to make it class AB push pull but need 2 EL84 or 2 6L6 and needs a phase inverter that is like making a new amp. I was reading on the internet and find that the Epiphone Galaxy is 10watts and the circuit is almost indentical but with a EQ and Gain control and has a 6L6 in the output with the same output transformer of 5kohm in the primary. I think that if I change the tube socket to an octal and put the 6L6 and adjust the bias I can get 10 watts with the preamp section stock. Thanks

telecrater · 2008-05-19 09:13

hold on buddy, you will also need to re-bios the amp for the tubes for the amp. also even a 10 watt amp has enough current running thru it to kill you so if your going to be poking around in there be careful.

J.M.P.A. · 2008-05-19 14:46

Thanks for remember that I will be careful because I dont want to die now LOL I will be checking at a local tv repair shop that has old tubes to get other opinions on this mod an to check if they have the tube